Brand:

Wolftooth ReMote for Shimano IS-II

$85.00

Wolftooth ReMote IS-II for Shimano I-Spec II – Includes IS-II hardware

Out of stock

SKU: LIN04002 Categories: ,

Description

From its hassle-free installation to smooth ball bearing action to engineered failure point, the lightweight ReMote leads in every category.

  • UpFront cable fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration.
  • Large-diameter ball-bearing pivot: An industry first, the ReMote uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation.
  • Cable-kind clamp: A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing.
  • Low-profile lever: The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.
  • Integrated cable adjustment: The ReMote solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters.
  • Breakaway axle pivot: Crashes are bad- but expensive crashes are worse.  That’s why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash.
  • High-traction lever: A machined surface ensures that control is not lost- even in the worst of conditions.
  • Broad compatibility: The ReMote has been tested and is recommended for use with many cable-actuated dropper posts. See the compatibility section below for details.
  • Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USA.

Compatibility

  • Compatible with ALL CABLE ACTUATED DROPPER POSTS!
    • Mounting and Standard versus Light Action recommendation charts – refer to wolftooth website.
  • Works with dropper posts that have the barrel end of the cable at the remote and those that have the barrel end at the post.
    • If the barrel is normally at the remote, simply clip the barrel off and the cable will be “pinched” at both the post and the remote (no barrel needed)

Additional information

Weight 0.1 kg
Dimensions 18 × 10 × 4 cm